"Did you unplug it and plug it back in?" - every IT Person, ever. Field visits for simple instrument resets are a costly drain on resources. While most dataloggers have control ports that can power cycle devices and instruments, these ports are often exhausted as sensor density increases. By integrating a microcontroller, we have expanded our control capacity via multi-channel relay boards. Logic within the main datalogger verifies data transmission, validity, and connectivity before communicating with an external microcontroller that manages the power supply to individual devices and instruments. More importantly, we've moved beyond simple "On/Off" control by monitoring individual instrument's current draw in real-time. These data are passed to the primary datalogger, enabling automated notifications if hardware is drawing outside of specifications. Because the entire system can be monitored and controlled remotely, it provides a comprehensive "health check". This reduces unnecessary field visits and equips staff with additional diagnostic information needed to troubleshoot before leaving the office.
Trevor has been working for the Estuarine Hydrodynamics and Sediment Transport team for almost 14 years. In his time, he has been heavily involved in index velocity and complex velocity mapping projects, water quality, and fish tracking. He's installed more ADCPs, QW Sondes, and Hydrophones... Read More →
After the devastation of the 1997 flood, there was agreement in the Fargo-Moorhead community that something needed to be done to prevent a repeat of the catastrophic damages. Planning began for what would become the FM Area Diversion. The process has included studies, permits, Congressional action and hard work from many key entities, including the USGS. Now, the community is on track to have permanent, reliable flood protection by 2027. This presentation will outline the project and USGS's involvement leading up to, during, and post project development.
An introduction and discussion of benefits and best uses of an experimental LoRa enabled data logger and LoraWAN network highlighting their benefits, practical applications, and optimal use cases. Demonstrations of primary and redundant telemetry options deployed at sites in the Sacramento-San Joaquin Delta and San Francisco Bay. Additional demonstrations showcasing the development of custom alerts, automated notifications, and remotely triggered solutions designed to support site operations, telemetry reliability, and data health monitoring.
Trevor has been working for the Estuarine Hydrodynamics and Sediment Transport team for almost 14 years. In his time, he has been heavily involved in index velocity and complex velocity mapping projects, water quality, and fish tracking. He's installed more ADCPs, QW Sondes, and Hydrophones... Read More →
Efficiency isn't just a goal-- it's a necessity when managing a large network of gages. Manual checks and generic station-health emails are so last century. We've integrated custom programming into our internet-connected dataloggers to improve our standard monitoring workflow. By utilizing an open-source web server and HTTP PUSH/POST methods, we send push notifications to "subscribed" users. Notifications are completely customizable and end-users only "subscribe" to gages that they run or are interested in. They receive instant notifications if there are instrument-specific issues, total system failures or peaks in parameters that should be targeted. With custom messaging, we also build in troubleshooting tech-tips. No more generic "Low Battery" message; users get specific messaging containing diagnostic tips and the likely culprit for the issue or failure. Our gages don't just record data; they advocate for their own maintenance and targeted sample scheduling.
Trevor has been working for the Estuarine Hydrodynamics and Sediment Transport team for almost 14 years. In his time, he has been heavily involved in index velocity and complex velocity mapping projects, water quality, and fish tracking. He's installed more ADCPs, QW Sondes, and Hydrophones... Read More →
A presentation on the application of salt dilution tracer discrete discharge measurements in under ice conditions. An overview of the method and workflow is discussed. Results of under ice measurements will be reviewed emphasizing the successes, technical challenges, and the lessons learned. Including a further discussion on improving accuracy and repeatability of the method in the future.
